ERROR: No boot disk has been detected or the disk has failed

I've acer-pc which had at the beginning installed oem windows 8 or 8.1 x64. Later I wanted to install custom ubuntu. I checked oem/normal/x86/x64, other windows installations. I've installed os even on other hard drives that I thought it might be disc issue but it's not.

Now after x64 ubuntu installation it still show the ERROR: No boot disk has been detected or the disk has failed. message which does not allow to use that pc in any way.

I've started ubuntu from usb (after oemubuntu/next/next installation) it shows:

sudo parted -l
Model: ATA ST3250410AS (scsi)
Disk /dev/sda: 250GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags 1 1049kB 538MB 537MB fat32 boot 2 538MB 237GB 237GB ext4 3 237GB 250GB 12.8GB linux-swap(v1)

About Boot Info Script 0.61 [1 April 2012]:

============================= Boot Info Summary: =============================== => No boot loader is installed in the MBR of /dev/sda. => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________ File system: vfat Boot sector type: FAT32 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /efi/ubuntu/grubx64.efi /efi/ubuntu/MokManager.efi /efi/ubuntu/shimx64.efi
sda2: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 14.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab
sda3: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info:
sdb1: __________________________________________________________________________ File system: vfat Boot sector type: SYSLINUX 4.05 20140113 Boot sector info: Syslinux looks at sector 2039876 of /dev/sdb1 for its second stage. SYSLINUX is installed in the directory. The integrity check of the ADV area failed. No errors found in the Boot Parameter Block. Operating System: Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg /efi/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 249.9 GB, 249923032064 bytes
255 heads, 63 sectors/track, 30384 cylinders, total 488130922 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 488,130,921 488,130,921 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 463,060,991 462,010,368 Data partition (Linux)
/dev/sda3 463,060,992 488,130,559 25,069,568 Swap partition (Linux)
Drive: sdb _____________________________________________________________________

... and END of this file:

--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=8168ed63-0e0e-4921-9480-b7c8fe1772e5 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=E63F-01E0 /boot/efi vfat defaults 0 1
# swap was on /dev/sda3 during installation
UUID=21500b24-730b-4326-8f5f-e95c83ac17b0 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda2: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s)
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then set gfxmode=auto insmod efi_gop insmod efi_uga insmod gfxterm terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" { set gfxpayload=keep linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash -- initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" { set gfxpayload=keep linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash -- initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" { set gfxpayload=keep linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true -- initrd /casper/initrd.lz
}
menuentry "Check disc for defects" { set gfxpayload=keep linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash -- initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
========================= sdb1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s)
================= sdb1: Location of files loaded by Syslinux: ================== GiB - GB File Fragment(s)
============== sdb1: Version of COM32(R) files used by Syslinux: =============== syslinux/chain.c32 : COM32R module (v4.xx) syslinux/gfxboot.c32 : COM32R module (v4.xx) syslinux/vesamenu.c32 : COM32R module (v4.xx)
========= Devices which don't seem to have a corresponding hard drive: =========
sdc
=============================== StdErr Messages: ===============================
cat: /tmp/BootInfo-CvknuXt4/Tmp_Log: No such file or directory
/home/ubuntu/Downloads/bootinfoscript-061/bootinfoscript: line 1646: [: 2.73495e+09: integer expression expected
cat: /tmp/BootInfo-CvknuXt4/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-CvknuXt4/Tmp_Log: No such file or directory No volume groups found

Regards

6 Reset to default

Know someone who can answer? Share a link to this question via email, Twitter, or Facebook.

Your Answer

Sign up or log in

Sign up using Google Sign up using Facebook Sign up using Email and Password

Post as a guest

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

You Might Also Like