In my office all computers are Windows and my computer runs Ubuntu 18.04.

We are connected by same network where IPv4 default gateway is 192.168.1.246, my IPv4 address is 192.168.1.111 and the the Windows computer to which the printer is connected has IPv4 address 192.168.1.114(the printer is shared by the Windows 8 computer).

How do I connect/print with the printer with my Ubuntu?

My printer is HP Laserjet M1005 MFP.

2 Answers

Here is how to go about it in pictures

System Setup > Devices Printers

Do not click on the Green Add... button on top. Click on additional printer settings... circled above.

You should see a smaller window with +Add button on top left:

In the New Printer window select Windows Printer via SAMBA:

Then fill in the printer server detail. You may also click the browse button and search for printer servers.

Select HP as the printer manufacturer and then then scroll down to find your printer:

Click forward and complete the process.

Hope this helps

You will need to install the driver foo2xqx.

According to the page you will need to perform following steps (open terminal and type in commands):

wget -O foo2zjs.tar.gz
tar zxf foo2zjs.tar.gz
cd foo2zjs
make
./getweb P1005 # Get HP LaserJet P1005 firmware file
./getweb P1006 # Get HP LaserJet P1006 firmware file
./getweb P1007 # Get HP LaserJet P1007 firmware file
./getweb P1008 # Get HP LaserJet P1008 firmware file
./getweb P1505 # Get HP LaserJet P1505 firmware file
sudo make install
sudo make install-hotplug
sudo make cups
sudo gnome-cups-manager

Adding the printer via command line using CUPS:

 lpadmin -p "NAME" -v "URI" -E -P /usr/share/cups/model/file.ppd.gz lpadmin -d "NAME" # Set the default